microF

Technical Specifications

• Detection Limit:
  • <1 ppb (with default settings)
• Detection Range:
  • 0 – 300 ppb (other range on request)
• Measurement:
  • Detector : PhotoMultiplier
  • Temporal resolution : 1 to 120 seconds
  • Response time : 10 minutes (with default settings)
  • Condition : Gas T°: 5 – 40°C; Gas RH: 20 – 80%; Atmospheric pressure
  • Calibration : Gaseous Formaldehyde
• Sampling:
  • Method : Continuous flow
  • Gas flow rate : 0-1 L/min (default setting 250 mL/min)
  • Gas flow rate : 0 – 30 mL min-1 (default setting 20 mL min-1)
  • Gas flow rate uncertainty : ± (1.5% Read + 0.5% Full Scale)
  • Liquid flow rate : 0 – 400 μL min-1 (default setting 20 μL min-1)
  • Supply connection : 1/8’’ for gas; 1/16’’ for liquid
• Instrument supply:
  • Power supply : Input 100 – 240V ±10%; 1.5 A max; 47 – 63Hz / Output 15V; 6.67A 100W
  • Battery life : Lithium-Ion / Autonomy > 2h
  • Power consumption : max 75w
• General:
  • Dimensions : 32×28×15 cm with & 32×36×15 cm without bottle holder / 6.5 kg including bottle holder
  • Operational conditions : 0 – 40°C / 20 – 80% RH
  • Storage conditions : 0 – 40°C / 0 – 85% RH
  • Display : 7” TFT display; resolution 800 x 480; integrated touchscreen
  • Autonomy: 2 hours
  • Fluoride liquid autonomy: (100ml): 80 hours
• Software & communication:
  • Expert and standard modes; Data saving; Analysis setting, launching and monitoring; Defects and maintenance management
  • USB : Data transfer (aera, retention time, concentration)
  • Ethernet : Communication and remote control
• Mobility and accessories:
  • Carrier case with handle and integrated pre-cut foam for accessories
  • DNPH tubes and rings; Power supply & cable; Particle filter; Filter strainer; Carrier case with pre-cut foam; Microporous tube; 100 mL bottles with each storage and analysis caps with ferrules, 1/8’’ & 1/16’’ inox caps with associated ferrules; Teflon tubes and associated ferrules; Bottle holder; Stylus.
• Other feature:
  • Canister & FLEC® system