Technical Specifications
- Analysis Range:
- From C10 (Hexane, Dimethylbutane) to C40 (Benzo(a)pyrene and N-Eicosane)
- Detection Limit:
- Benzene: 5 ppt or 0.0164 µg/m³
- Naphthalene: 10 ppt or 0.05 µg/m³
- Detection Range:
- Benzene: 0.1 to 380 µg/m³
- Naphthalene: 0.05 to 400 µg/m³
- Relative Standard Deviation (Repeatability):
- < 0.3% over 48h (RT)
- < 3% over 48h (Concentration)
- Cycle Time:
- 30 to 60 minutes (depending on application)
- 90 to 120 minutes (optional)
- Gas Supply:
- H2 (FID and carrier gas): 45 mL/min (inlet 4 bars; 1/16’’ double ferrule)
- Air (FID): 450 mL/min (inlet 4 bars; 1/8’’ double ferrule)
- Sample inlet: 1/4’’ vacuum pump
- Pneumatic valve 90ml/commutation
- Sample Volume:
- Up to 2200 mL (programmable)
- Power Supply:
- Main: 230 V / 115 V, 50 Hz / 60 Hz
- Battery: 24 V (optional)
- Electrical Consumption:
- Mean: 300 VA, Peak: 460 VA
- Dimensions and Weight:
- Rack: 19’’ (5U)
- Height: 222 mm
- Width: 482 mm
- Depth: 600 mm
- Net Weight: 22 kg
Analysis for light S VOCs and heavy S VOCs from C10 to C40
The airmoVOC C10-C40 is a gas chromatograph specifically designed for the analysis and monitoring of trace and ultra-trace levels of light and heavy S VOCs from C10 to C40, such as linear alkanes and gaseous PAHs. This system is equipped with a flame ionization detector (FID) for precise analysis and integrates all components into a compact 19’’ rack.
Key Features:
- Wide Analysis Range:
- Detects linear alkanes up to N-Eicosane (C40) and gaseous PAHs from Naphthalene to Benzo(a)pyrene (C20).
- Covers applications from urban air monitoring to industrial process emissions and VOC analysis in water.
- Advanced Sampling Technology:
- Features uninterrupted sampling with pre-concentration on an absorbent tube.
- Utilizes thermo-desorption and programmable temperature gradient up to 350°C for precise compound detection.
- High Sensitivity and Reliability:
- Detection down to 5 ppt for Benzene and 10 ppt for Naphthalene.
- Stable and accurate results with < 0.3% RSD for retention time over 48 hours.
- Software Control with VISTACHROM®:
- Allows remote monitoring, full traceability, and setup of threshold alarms.
- Supports data export via MODBUS, 4-20mA, or 0-10V outputs.
Applications:
- Urban and non-urban area pollution control
- Indoor and outdoor BTEX monitoring
- Plant and process emissions
- Contaminants extracted from plastics, PET, and oils
- VOC analysis in water (using a purge module)
Ordering Information:
- Model: A10000
Tests reports & Certifications